Keo dán đá webertai gres có cường độ bám dính rất cao so với những dòng keo dán gạch thông thường, keo này có kích thước lớn và chuyên được dùng cho dán gạch hồ bơi (loại gạch mosaic), keo ốp lát gạch đá hay gạch cho khu vực ngoài trời.
Nội dung tóm tắt bài viết
1.Các tính năng của Webertai Gres
Keo dán đá weber được dùng cho các loại vật liệu kích thước lớn như gạch, đá cẩm thạch, đá granit. Thích hợp để dùng cho xây dựng hồ bơi, bể bơi hoặc dùng để lát đá trong các nội thất (loại keo ốp lát gạch đá)
2. Ưu điểm của keo Webertai Gres
- Webertai Gres được sử dụng cho bề mặt có gốc xi măng, dùng để thi công dán gạch cho hồ bơi (đặc biệt là với gạch mosaic), dùng dán gạch trên lớp bề mặt gạch cũ hay dán gạch cho những khu vực ngoài trời như sân thượng, ban công.
- Có thời gian điều chỉnh gạch được lâu hơn. Kéo dài thời gian để sử dụng của hỗn hợp sau khi trộn (cần tránh ánh nắng mặt trời và các nơi có nhiệt độ cao). Thời gian để chỉnh sửa gạch là 15 phút. Thời gian cần chờ để lưu thông sau khi làm lát nền là 24 giờ
3. Thông tin vềWebertai Gres
Webertai Gres là dạng keo dán gạch, được sản xuất 2 màu: xám và trắng. Đóng gói trong bao: 20kg/bao. Định mức tiêu thụ Webertai Gres là: 20kg/4m2. Hạn sử dụng: 1 năm.
4. Thông số của Webertai Gres
Các thông số kỹ thuật chính của Webertai Gres là:
- Khả năng chịu nhiệt: -30°C đến +70°C
- Đạt tải trọng tối đa khi ốp gạch theo một phương thẳng đứng là 40 kg/m2
- Đạt cường độ bám dính ở trong trạng thái khô: > 1 MPa (N/mm2)
- Đạt cường độ bám dính sau khi được ngâm nước: > 1 MPa (N/mm2)
- Đạt cường độ bám dính sau khi bị lão hóa nhiệt: > 1 MPa (N/mm2)
5. Hướng dẫn thi công Webertai Gres
Chuẩn bị cho lớp bề mặt:
- Đối với lớp mặt nền mới thì cần phải được làm cứng, sạch sẽ, bằng phẳng và khô ráo với mức độ hút nước thông thường.
- Đối với những mặt nền cũ thì cần thiết loại bỏ hoàn toàn các lớp keo/vữa dán trên lớp nền cũ, đối với những viên gạch/đá đã bị bong tróc cũng phải được đục bỏ và được làm sạch lớp keo/vữa dán cũ sau đó mới lát gạch/đá vào lại vị trí cũ. Đảm bảo bề mặt đã được vệ sinh sạch sẽ không còn dính lớp dầu mỡ hay các bụi bẩn còn bám lên đó.
- Nếu bề mặt đã hút nước nhiều thì nên được làm ẩm cho đến khi không còn bị hút nước nữa mới tiến hành lát gạch. Trong các trường hợp mới tô tường hoặc chỉ mới cán nền thì cần phải bảo dưỡng lớp bề mặt trong 7 ngày (thực hiện cho mỗi 1cm chiều dày) trước khi vào lát gạch
- Đối với các lớp nền cũ hoặc lớp nền gạch cũ thì cần sử dụng axit clohydric (chất tẩy rửa dùng trong phòng tắm) để có thể loại bỏ được hoàn toàn lớp keo/vữa dán cũ.
- Đối với các lớp nền không được ổn định như tấm thạch cao hay tấm sợi xi măng thì cần phải có được hệ thống khung để dùng chống đỡ cho mỗi 900 cm2 (30 x 30 cm)
Chuẩn bị phần gạch
- Không được ngâm gạch trong nước vì sẽ làm giảm đi khả năng kết dính.
- Gạch cần đảm bảo phải khô, sạch sẽ và không bị bám dầu mỡ, bụi bẩn.
Chuẩn bị keo Webertai Gres
- Cho vào thùng 5 lít nước sạch (nhiệt độ của nước bằng với nhiệt độ phòng, không ấm hay quá nóng).
- Từ từ cho keo dán Webertai Gres (20 kg) vào nước theo tỷ lệ giữa keo với gạch là 1 : 3 (tính theo khối lượng) hoặc 1 : 4 (tính theo thể tích)
- Khuấy đều bằng máy khuấy có tốc độ chậm (500 vòng/phút) hay dùng bay trộn đều lên bằng tay cho đến khi hỗn hợp đạt được độ đồng nhất và không bị vón cục.
- Sau khi trộn xong cần để hỗn hợp từ 3 – 4 phút trước khi vào sử dụng để các thành phần hóa học được phát huy tác dụng.
- Hỗn hợp của chất keo dán gạch Webertai Gres cần được sử dụng trong 4 giờ, tránh ánh sáng trực tiếp của mặt trời và những nơi có nhiệt độ khá cao.
Cách thi công
- Trát một lớp keo dán lên bề mặt cần phải lát gạch và sau đó dùng bay răng cưa để tạo một lớp keo đồng đều trên lớp bề mặt có diện tích 1 – 2 m2. Độ sâu những khe của bay răng cưa giúp làm kiểm soát được mức độ đồng đều và lượng keo sử dụng. Đối với sàn thì cần trát đều lớp keo trên bề mặt, còn đối với tường thì cần trát keo theo phương ngang bằng cách dùng bay răng cưa
- Sử dụng bằng bay răng cưa sẽ đảm bảo được sự kết nối tốt hơn giữa những lớp gạch và bề mặt nền so với việc sử dụng bay thông thường.
- Trong tình huống kích thước của gạch lớn hơn 25 x 25 cm (10″x10″) thì phải trét thêm một lớp keo mỏng ở mặt sau của viên gạch để đảm bảo được lượng keo bao phủ đủ để có thể kết dính và giúp tránh tạo ra các khoảng hở dưới gạch dẫn đến trường hợp gạch rất dễ bị vỡ, gãy và thấm nước tại những vị trí thiếu keo
- Dán gạch lên lớp keo và cần ấn mạnh hoặc dùng búa cao su và gõ đều lên gạch để đảm bảo được sự tiếp xúc tốt nhất. Cần chừa đường ron tối thiểu là 2 mm để có thể tiến hành chà ron (keo dùng chà ron cho hồ bơi là Webercolor HR hoặc dùng Webercolor Poxy hay Kerapoxy).
- Lau thật sạch các phần keo còn thừa từ gạch và những đường ron bằng miếng xốp (đã được làm ẩm) trong khi lớp keo vẫn còn ướt.
- Các sự điều chỉnh gạch cần phải được hoàn thành trong vòng 15 phút trước khi keo Webertai Gres đóng rắn.
- Cần chờ 24 giờ trước khi bắt đầu tiến hành chà ron để keo có thể khô hoàn toàn.
6. Mua sản phẩm Webertai Gres uy tín tại đâu?
Công ty TNHH Nhật Đình là địa chỉ có nhiều năm kinh nghiệm trong việc phân phối sản phẩm Webertai Gres cũng như cung cấp các vật tư xây dựng và hóa chất uy tín hàng đầu trên thị trường. Chúng tôi luôn tự hào là đơn vị phân phối sản phẩm chất lượng top 1 hiện nay.
Toàn bộ sản phẩm của Nhật Đình đều có nguồn gốc và xuất xứ rõ ràng. Vì vậy, người tiêu dùng có thể hoàn toàn yên tâm về chất lượng của sản phẩm khi mua hàng tại đây.
Mọi thông tin thắc mắc xin quý khách hàng liên hệ theo địa chỉ sau:
Đánh giá
Chưa có đánh giá nào.